Adrenaline Wmns
Super lightweight waterproof ideal for ultra-light hiking, adventure races and multi-pitch alpine climbs. Your choice of low profile multisport or alpine hoods allow you to tweak the Adrenaline to your liking. Harness-friendly chest pockets allow easy access with or without a pack.

Prices in NZD

Availability: In stock

* Required Fields

Size Guide


More Views



  • Lightweight, compressible, waterproof/breathable Entrant DT ® 2.5 Layer fabric
  • Fully seam taped
  • Waterproof front and under arm vent flaps
  • Bottom opening front zip
  • Side to front waist draw cord
  • Underarm gusset designed for maximum movement
  • Pocket and vents use the same zip system
  • Single-handed cinch draw cord at hem
  • Wide elasticised cuffs with velcro closure
  • Tuck-away hood available as optional extra
  • Two hood designs available: multi-sport or alpine
  • Alpine hood designed to wear over a helmet
  • Both hoods fully adjustable and have a visor wire

Additional Information

Fabric Entrant DT ® 2.5 Layer
Average Weight Jacket 330g Alpine Hood 85g Multi-Sport Hood 60g
Made In New Zealand

Gelanots®, Entrant® D-EV, Entrant® GII XTH and Entrant® DT 2.5

Warm hand wash for best garment life. Use pure soap or mild detergent. We have tested and recommend Lux flakes, Sunlight soap, or Persil Sensitive. Lux and Sunlight soap need to be fully dissolved in hot water before converting it to warm. Do not use bleach. Rinse well to remove all residues. Do not wring. Drip dry in the shade to minimise UV exposure. Do not tumble dry. Cool iron may be used to rejuvenate the exterior DWR* coating. Do not dry clean.

Keeping waterproof breathable garments clean will increase their lifespan. During normal wear, dirt, salts and oils from contact with the skin will accumulate on the inside surface. This will show as a dark stain on the mesh, especially around the neck and hood. If left over an extended period of time, this may contaminate the laminate or coating and cause irreversible damage to the jacket. To prevent this happening the garment should be washed at least once a year and more often if worn regularly. Hanging up garments in dry well ventilated areas will prevent mildew building up on the fabric’s underside. Avoid all contact with solvents and chemicals, accidental contact should be washed off as soon as possible.

Waterproof/Breathable Fabric Performance Overview:

To ensure your garment breathes to its full potential it is important to maintain the water repellency of the outside surface. It is also important when you are physically active to wear as many non moisture absorbing layers as possible underneath the jacket. If you wear natural fibres (merino or cotton) keep them as light as possible and reduce the number of layers you use. For maximum breathability we recommend faster drying non moisture absorbing polyester fabrics for your thermal layers.

All waterproof breathable fabrics require regular cleaning. Jackets should be washed once a year and if worn regularly, you should wash them more often than this. A jacket may look clean on the outside but the most harmful contamination occurs from direct skin contact. The neck and hood regions are the most susceptible to this. Over time contamination from the skin will weaken the glue that holds the laminated layers together or the bonding between a coating and its outer fabric. This can cause irreversible damage and reduce the functional lifespan of the garment. Two-layer fabrics with an exposed underside are very susceptible to this and need more cleaning than three-layer fabrics. There is no need to overwash your waterproof garments. A quick hand wash of a jackets neck and hood region maybe all that is required to maintain its cleanliness and prolong it's life. Wearing collared garments or bandanas around the neck reduces the risk of contamination and the need to clean the garment as often. If the primary use of the jacket is to be worn while carrying a heavy backpack we would recommend using the heavier more durable mesh backed three-layer fabrics.

* DWR is the Durable Water Repellant coating on the outside of the garment’s face fabric. It is an important part of the garment’s performance as it allows water to bead off the surface. This maximises the breathability. DWR coating is applied as a specialised process during the manufacturing of the fabric. Over time it can wear down. When this happens the outside fabric will ‘wet out’ making it feel cold and clammy. In this state breathability is impeded.

The DWR can be rejuvenated by the use of a cool iron after washing. After extended use, a complete re-application of this will enhance the performance of your jacket. We have developed our own DWR treatment, a solvent based, environmentally friendly, flouropolymer spray called Gecko Guard. After testing water based DWR products we decided we needed a more durable, more effective product for our garments. We believe Gecko Guard is the best aftercare DWR treatment available.


Customer Reviews 1 item(s)

Really versatile, high performance jacket
This is a high performance jacket that can compete with any on the market. It is lightweight and has some excellent features that made it easy and comfortable to wear on my recent mountaineering expedition to Pakistan.
It comes with two hood options- and the full-on version fits really well over a climbing helmet ( something that many jackets fail to do). The pockets sit high, so you never have to worry about them getting buried under your harness or pack strap. And to save weight, the pockets utilise the same zip as the pitzip - a clever innovation which saves on weight. The fabric is lightweight but kept out all the weather our expedition threw at us. It also packs down really small, saving on weight in the pack. A great jacket for mountaineering! Review by Pat Deavoll / (Posted on 18/08/2014)

Write Your Own Review

You're reviewing: Adrenaline Wmns